Defoamer

Update: 2015/2/5??????View:
  • Brand: ???
  • Type: ???
  • Order Online
Introduction

天然氣生產到了中后期,為了提高天然氣產量一般采用泡排工藝。即向氣井中注入起泡劑,使水成為水泡,降低其密度以便帶出更多的天然氣。然而這種水泡進入輸氣管道后,因不能和天然氣徹底分離,而且對管道和下游設備帶來的危害,并影響氣體的準確計量。因此必須予以消除,傳統的消泡方法,是向輸氣管道中注入消泡劑,使之與里面的起泡劑進行化學反應,消除水泡。這種消泡方法由于混合不均,消泡效果差,且消泡劑的用量很大,浪費嚴重

Natural gas production in the later period, in order to improve the yield of the general use of foaming process of natural gas. That is to gas injection foaming agent, the water becomes vesicular, reducing its density so as to bring out more natural gas. However the blisters into the gas pipeline, because cannot and gas completely separated,harm and bring on piping and downstream equipment, accurate measurement and the influence of gas. Thereforemust be eliminated, the traditional method of defoaming, is injected into the gas pipeline of defoaming agent,foaming agent and make the inside of the chemical reaction, eliminate blisters. The defoaming method because ofuneven mixing, defoaming effect is poor, and a large amount of defoaming agent, serious waste

本公司針對以上問題研制了兩種消泡器,它能使消泡劑和起泡劑充分混合、相容,充分反應,達到完全消泡的目的。

The company in view of the above problems, we developed two kinds of defoaming device, it can make thedefoaming agent and agent are fully mixed, compatibility, foaming reaction fully, completely attain the purpose of defoaming.

一、液體消泡器

A, liquid defoaming device

液體消泡器是針對消泡劑是液體的狀態的情況而制定的。

Liquid defoaming device is for defoaming agent is liquid state and the development of the.

1、功能特點及作用

1, function characteristics and role

①消泡器殼體按壓力容器設計制造,安全可靠;

The defoamer shell design according to the pressure vessel manufacturing, safe and reliable;

②結構簡單,安裝方便,便于維護;

The advantages of simple structure, convenient installation, convenient maintenance;

③節約消泡劑用量,大幅度降低生產成本;

The saving amount of defoaming agent, greatly reduce the production cost;

④提高天然氣計量的準確性;

To improve the accuracy of natural gas measurement;

⑤大幅度減少下游管道的沉積水,減少管道的通球次數,保護管道及下游設備,提高其使用壽命。

The greatly reduced water deposited downstream pipeline, reduce the number of pipeline pigging, protect thepiping and downstream equipment, improve its service life.



二、固體消泡器

Two, solid defoamer

固體消泡器是針對消泡劑是固體工況而研制的,使用固體消泡劑較之于液體消泡劑有節能和降低成本的優勢,因而研制固體消泡劑具有較高的價值。

Solid defoaming device is developed for defoaming agent is a solid state, the use of solid defoamer compared withliquid defoaming agent has the advantages of saving energy and reducing the cost, so the development of soliddefoaming agent has high value.

性能特點:

Performance characteristics:

1.水汽分流,水能與固體消泡劑充分接觸,使固體消泡劑的溶解量達到消泡的要求;

1 water diversion, water and solid defoamer full contact, the dissolved amount of solid fire foam agents reach the defoaming requirement;

2.設有二次混合裝置,使消泡劑和水中起泡劑充分混合均勻、反應,達到完全消泡的目的;

2 is provided with two mixing device, the defoaming agent and water foaming agent are fully mixed evenly, reaction,to complete the purpose of defoaming;

3.不消耗電能,是節能型產品;

3 no electric energy consumption, is an energy saving product;

4.安裝和操作簡便,安全可靠;

4 installation and operation is simple, safe and reliable;

5.設有消泡劑溶解信號,可實行遠程監控。

5 a defoaming agent dissolved signal, can implement remote monitoring.


More Products
影音先锋中文字幕亚洲资源站_欧美毛片aⅴ免费观看_日韩a片r级无码中文